4 speed help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969 k/10 · 10-31-2010, 03:18 AM

So i am swaping out the automatic transmission for a 4 speed. The truck was once a 4 speed so the install is going well. I got all the original parts off a donor truck but have hit a snag. The rod connecting the pedal to the z-bar does not line up. It seems like the piece coming off the pedal assembly where the rod hooks needs to move over about an inch or two so that the rod will be able to travel through the hole and connect to the z bar. Any ideas why this may be?
Thanks

10-31-2010, 03:18 AM	#1
1969 k/10 Registered User Join Date: Jun 2008 Location: Santa Rosa, California Posts: 102	4 speed help So i am swaping out the automatic transmission for a 4 speed. The truck was once a 4 speed so the install is going well. I got all the original parts off a donor truck but have hit a snag. The rod connecting the pedal to the z-bar does not line up. It seems like the piece coming off the pedal assembly where the rod hooks needs to move over about an inch or two so that the rod will be able to travel through the hole and connect to the z bar. Any ideas why this may be? Thanks __________________ 1969 red k/10 with sb350 4.11 gear ratio, front disk, 3 speed automatic



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.