Ackattack's Pro touring restoration thread

[67C10BUB]

Originally Posted by Ackattack

I'll get some pictures later...but here's the answer of how I did it.

First, I'm using corvette accessory brackets and an LS1 F-body A/C compressor. So it is a little different than the 5.3 truck A/C setup. Basically I connected the doc's block to the back of the compressor, put on the fittings, cut the A/C hoses to length and routed them. I marked the fittings and hoses, and then removed them and had the fittings crimped onto the hoses. Then re-installed.

I'm pretty sure this is the a/c adapter I used
http://www.docsblocks.com/proddetail.asp?prod=AA0443

Thanks for the info. Even though they are a little different, any help I can get is appreciated. Did you use the Doc's Blocks hose kit as well?