Finally done with my headers and dual exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Justins76 · 11-30-2010, 11:36 PM

Hedman Elite Hedders with HTC coating, #69890. The only problems I had with them was the pass side hit the fuel and brake lines running along the frame. Just had to bend them out of the way a little. Also bolting up the compressor and steering pump bracket to the header. Instructions say construct a simple spacer. Well I ended up using a bunch of washers ground flat along the header tube side and they still don't seem to line up very well.

The exhaust is 2.5" mandrel bent Flowmaster pipes that exit behind the rear wheels and 2 Dynomax Ultraflow mufflers. Next weekend I'll put in the Gibson tips and post the pics.

11-30-2010, 11:36 PM	#1
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Finally done with my headers and dual exhaust Hedman Elite Hedders with HTC coating, #69890. The only problems I had with them was the pass side hit the fuel and brake lines running along the frame. Just had to bend them out of the way a little. Also bolting up the compressor and steering pump bracket to the header. Instructions say construct a simple spacer. Well I ended up using a bunch of washers ground flat along the header tube side and they still don't seem to line up very well. The exhaust is 2.5" mandrel bent Flowmaster pipes that exit behind the rear wheels and 2 Dynomax Ultraflow mufflers. Next weekend I'll put in the Gibson tips and post the pics. Attached Images __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.