Steering Column Rebuild - Issues

[phantom4]

I recently decided to replace the bearings in my 70 K10 non tilt column. While replacing the bearings I also decided to replace the turn signal switch and cam canceling unit as my turn cancel never worked.

Well I get it all back together and finished assembling the column and I now have two problems.

1) Canceling still is not working, I can hear the detents contacting the switch arm but overall it still does not release in either direction.

2) My pointer is now 10 degrees rotated counter clockwise from the point housing so none of my gears are lined up correctly. I also noticed my shift linkage was short, also indicating the shift arm had rotated away from the linkage.

I used the diagrams posted here for reference upon re-assembly and have not noticed anything binding so just wondering what I am missing???