Just got the engine in on Sunday, Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DT1 · 12-07-2010, 11:30 AM

It took a while but the engine and transmission are rebuilt and installed. While I had them out I had some time to clean up the engine compartment. The engine got an RV cam and the deck shaved a bit. I also did some mods to the Rochester.
The TH350 trans got a five clutch pack and B&M shift kit.
I know it's not as clean as a lot of stuff I see on this forum but it's intended to to be driven in any and all conditions.
BTW...If any of you need the name of a good machine shop in the Los Angeles area, I can finally recommend one.

12-07-2010, 11:30 AM	#1
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	Just got the engine in on Sunday, Pics It took a while but the engine and transmission are rebuilt and installed. While I had them out I had some time to clean up the engine compartment. The engine got an RV cam and the deck shaved a bit. I also did some mods to the Rochester. The TH350 trans got a five clutch pack and B&M shift kit. I know it's not as clean as a lot of stuff I see on this forum but it's intended to to be driven in any and all conditions. BTW...If any of you need the name of a good machine shop in the Los Angeles area, I can finally recommend one. Last edited by DT1; 12-07-2010 at 11:31 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.