Control Arm Question ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Demonspeed13 · 12-19-2010, 05:36 PM

I have a 67 2wd I am working on and I already have the Cpp drop spindles and front end rebuild kit but I noticed several people talking about using the control arms from the 73-87 model trucks . I was wondering what all has to be swapped out in order to use them and if they will work with the parts I already have ? The spindle kit I have come with the 73-87 upper and lower ball joints and outer tie rod ends as an upgrade . The truck already has front disc brakes so the main reason I am interested is the bushings can be upgraded . I haven't found any upgraded bushings for my 67 .

12-19-2010, 05:36 PM	#1
Demonspeed13 Registered User Join Date: Jul 2010 Location: Kingsport Tn Posts: 35	Control Arm Question ??? I have a 67 2wd I am working on and I already have the Cpp drop spindles and front end rebuild kit but I noticed several people talking about using the control arms from the 73-87 model trucks . I was wondering what all has to be swapped out in order to use them and if they will work with the parts I already have ? The spindle kit I have come with the 73-87 upper and lower ball joints and outer tie rod ends as an upgrade . The truck already has front disc brakes so the main reason I am interested is the bushings can be upgraded . I haven't found any upgraded bushings for my 67 . __________________ Demonspeed13 Last edited by Demonspeed13; 12-19-2010 at 05:39 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.