Dually wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slomotion** · 06-26-2003, 05:02 PM

I did a search a couple of weeks ago concerning dually wheels on a '68 C20. There was some discussion, but I never saw, (or missed) what type of wheels will fit my truck.

It currently has a tube-type 16" wheel (not exactly a split-rim but not a regular steel wheel either. Sorry I don't know the correct name for the type.) What I would like to do is run a set of radials but these wheels won't do it.

The wheels are 16" with a 4 1/2 inch center pilot hole, and 8 lugs with a 6 1/2 inch bolt pattern. Is there an after-market wheel or (ah-hmm) another brand wheel that will fit?

Thanks

06-26-2003, 05:02 PM	#1
slomotion Old Duffer Join Date: Mar 2003 Location: Maine Posts: 1,822	Dually wheels I did a search a couple of weeks ago concerning dually wheels on a '68 C20. There was some discussion, but I never saw, (or missed) what type of wheels will fit my truck. It currently has a tube-type 16" wheel (not exactly a split-rim but not a regular steel wheel either. Sorry I don't know the correct name for the type.) What I would like to do is run a set of radials but these wheels won't do it. The wheels are 16" with a 4 1/2 inch center pilot hole, and 8 lugs with a 6 1/2 inch bolt pattern. Is there an after-market wheel or (ah-hmm) another brand wheel that will fit? Thanks __________________ '68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.