'68 Door Panel Hardware - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daddybooz · 01-06-2011, 02:35 PM

Hi Fellas,

I had to take off the inner door panel to install new lockssets. The PO installed a carpet over the original metal door panel. In doing so, kind of half ACED it back together. There appears to be 4 on the bottom and two for arm rest a square threaded insert in the door that accepts a fastener. Well, I think there is only 1 left! I've found all other necessary hardware (thanks to Southern Kentucky

) to make right but I cant find these square threaded inserts anywhere!!???

Does anyone know where OR what other trick to make this work?

Thanks for your help, this forum is awesome!

Robert

01-06-2011, 02:35 PM	#1
daddybooz Registered User Join Date: Feb 2010 Location: Fort Atkinson, WI Posts: 39	'68 Door Panel Hardware Hi Fellas, I had to take off the inner door panel to install new lockssets. The PO installed a carpet over the original metal door panel. In doing so, kind of half ACED it back together. There appears to be 4 on the bottom and two for arm rest a square threaded insert in the door that accepts a fastener. Well, I think there is only 1 left! I've found all other necessary hardware (thanks to Southern Kentucky ) to make right but I cant find these square threaded inserts anywhere!!??? Does anyone know where OR what other trick to make this work? Thanks for your help, this forum is awesome! Robert __________________ DaddyBooz '68 C10 LWB KCP 406; 400 small block, 30 over, alum heads built by Kurt Clapper Ceramic center dumps, custom 2 1/2" SS all the way back w/MagnaFlows 2"/4" drop on 15's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.