Engine Build thoughts.

[69Beauty]

this is my first engine build (im 15) and was wondering what you think about my setup so far.
a 3970010 block .030 over
standard crank standard rods
keith black 193 pistons
keith black rings
fel pro .015 steel shim head gasket
stock cylinder deck (dont know how far down)
vortec heads with minor porting
lunati 60102 cam 1.5 rockers
edelbrock performer rpm intake
rebuilt qjet carb
th350 trans
this is going into a 1969 c-10 long box.
the trans is newly rebuilt but has no stall.
and recommendations would be welcome.
and if someone would be kind enough to run this through your desktop dyno that would be greatly appreciated.
thanks
logan