Help with Frenched headlights

[floridasteve]

I hope you guys can assist me with the install of the rings for these frenched headlights. The plastic trim rings appear to go fore and aft of the headlight. However the holes dont align with the dimples on the back of the headlight. No problem I can trim the ring to "sandwich" the headlight between the rings. Then the holes don't align with the tabs inside the buckets. These were prewelded so it is not something I did other than position them into the opening prior to welding and doing the bodywork. My questions are where do the springs attach to and am I correct that the screws go thru the plastic ring and then into the tabs which will allow me to adjust the headlight . I need to be able to adjust the depth so there is no gap betweeen the outside trim ring and the light glass. Any photos or help is greatly appreciated. I have attached photos of where I am on the issue.