TX 72' Bare Cab w/title & Glove Box SPID $400

[lynnfield]

I have decided to seperate the cab from my "parting" thread. The windshield frame, drip edges, cab corners are all good, the rockers are in nice shape and could be used as they are, but they are not perfect. There are a couple of rust issues, but is in better shape than a lot of them I typicaly see. First, there is a rust spot on the upper cowl about the size of a half dollar. Second, both kick panel areas will need some attention, the passenger side is the worst of the two. I have included pics of those areas, with close ups of the under side of the passenger kick panel area. You can see in the pic that the rust from the floor is up to the cab support, but has not gotten into it. The floor shows some surface rust, and is solid, except at the base of the before mentioned kick panel area. Let me know if you have any questions. Thanks


zwhb02 had asked about this cab in my other thread, I'll give him first "dibbs" and a day or two to decide. Thanks, Greg