Homemade Fan Shroud

[JGross]

I just finished the fan shroud on my 65 C10 and thought I would share some photos with you.

I first used 2 inch and 1 inch flat bar to make a frame next to the rad. Then I used some 22 gauge sheet to make a 20 loop for the 18 inch fan.



After getting the shroud centered around the fan I welded the loop to the frame






A little primer




I used a bead roller to stiffen up the loop



YES that is green paint I ran out of black



I used a piece of plastic edge trim so that the frame would not rub the rad.