Rocker to Front pillar alignment

[J. Billman]

Hey,

I have been working on my 70 C20 for 3 solid weekends. I welded in a new floor pan and after that I started on the front pillar. It was garbage to begin with so it has not been useful as a reference. I welded in the new front pillar I bought from LMC last night and thought I would use the rocker panel I cut out as a test fit until the new ones get here. The rocker's I cut out were replacement and seem welded in... So I may have tweaked it a bit when cutting it out. I don't know. What I do know is, it is not fitting correctly around the front pillar. Can anyone tell from the pics I posted if I welded in the pillar wrong or maybe I need to trim more off the pillar or maybe I welded in the floor pan wrong and it's pushing the area out.

I just don't know. Thanks for any advice you can lend.

Joshua