WIW: 1972 Original take off Blazer Rocker boxes and parts, rear floor

[JimmyFloyd]

******** EVERYTHING HERE IS SOLD AND GONE! *******


Ok, getting ready to potentially part out my blazer, and was wondering what some of the harder to find parts would be worth. These parts were removed from a 1972 2wd blazer in California and then shipped to me last year. They are in very nice shape, very solid, and very hard to come by in take off form.

Rocker (Torsion) boxes:


Rocker (Torsion) box end caps (bad picture, no rot, both there, just surface rust like the top half shows):



Rear end cap filler panel.







Also have the rear 12-16 inches of the floor with the rear floor support. This is in nice shape, with I believe just a small spot around the wheel well that could use attention. Off the same 1972 2wd blazer. Has the hole for the filler in good shape, and it has the correct dimples in the rear brace for the frames on the 72's

















I also have more of this floor. I have the cut between the wheel wells with the rear seat bracket on it, as well as the front of the wheel wells, and a cut of the front cross member in nice shape with the correct blazer dimples in it and just surface rust.

Front Cross dimples:



What would these parts be worth?