|
02-07-2011, 07:23 PM
|
#1 |
|
Blue 67
Join Date: Apr 2004
Location: Western WA
Posts: 1,179
|
Carb rebuild
Hi Guys:
I am trying to rebuild my edlebrock 1406 for the first time. I just wanted to change the jets and gaskets but I came across a problem/question. While I was removing the float to change the gaskect on the top end, the needle under one of the float dropped out. I found it, cleaned it and put it back. When I put the new gaskets and floats back, I noticed the other float doesn't have the needl either. I really don't think I dropped anything else, and I can't find any other needle. I looked at a rebuild kit that I have, That also has only one needle in it but when I look at the manual, the picture suggest each float should have a needle under each float. So, the question (finally!!) is: does each float has one needle?! if yes, why the rebuild kit just has one? Does these needle have different sizes or can I just use the one in the rebuild kit instead of the one which is missing? Sorry about the long story. Thanks
__________________
1953 GMC 3/4 ton: current project 1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake 1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!! 1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive 1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project 2005 Silverado 2500, 4x4 Duramax, original owner |
|
|
| Bookmarks |
|
|
Threaded Mode