slik ricks 67 short wide CST

[67chevy1series]

Originally Posted by jbclassix

Well that sucks! I had a different short WP. And you can see that the INNER groove is what the 69-7? alt belt rode on.



I posted a picture of the outside of the frame where the bracket bolts to.

I had to turn the pivot bolt 180 to get the rod to fit in the tube.

Not 100% sure, but if you look in the upper left corner, between the heater box and firewall tunnel, I think that connector goes on that switch


I'm gonna have to dig further and see what i can find in my pictures. I'm getting ready for Church right now, so it will be later.

Super bummer on the parts!!!

Edit: The single hole one was on the left rear intake manifold bolt the 2 hole one was on the right rear 2 intake manifold bolts

its okay at least i can still use most of the parts! i need to figure out where the spark plug wire holders go i cleaned them and painted them black.... that extra wire that connects on the firewall .... i dont have that switch on the fire wall .... remember i have a 67 and the fire wall is different right there

Originally Posted by JasonBird

looking good there Rick!

thanks jason! i need to get a couple more things and i sholud be ready for my first start up!