OH 71 4x4 Drive shafts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dfairchild19 · 02-17-2011, 04:23 PM

I have the front and rear drive shaft from my 71 longbed pickup that I cannot use with my conversion. They were used with an SBC350/TH350/NP205 combo.

The rear shaft will need new joints as one end is missing the caps from the joint. The other end appears ok. It has no dents in it and the slip feels fine. $40 plus shipping

The front shaft is a CV style shaft and has all joints and caps in tact and in operable shape. The CV feels tight and smooth. Overall in good condition for a driver. $75 plus shipping

02-17-2011, 04:23 PM	#1
dfairchild19 Registered User Join Date: Feb 2010 Location: Dayton, OH Posts: 255	71 4x4 Drive shafts I have the front and rear drive shaft from my 71 longbed pickup that I cannot use with my conversion. They were used with an SBC350/TH350/NP205 combo. The rear shaft will need new joints as one end is missing the caps from the joint. The other end appears ok. It has no dents in it and the slip feels fine. $40 plus shipping The front shaft is a CV style shaft and has all joints and caps in tact and in operable shape. The CV feels tight and smooth. Overall in good condition for a driver. $75 plus shipping



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.