4x4 rear cab mount measurements - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mikey72 · 02-21-2011, 10:52 PM

I have a 72 chevy 4x4 that was a lwb converted to swb. The frame was cut in front of the rear cab mounts for some reason. When i took my bed off to replace the floor some friends of mine noticed the drivers side rear cab mount was welded back to the frame about a 1/2 inch higher than the passenger cab mount which was onnly held on by two bolts that was drilled in. Does anyone know the measurements from the bottom of the frame to the bottom of the cab mount or something of better detail so i could get this horrible mistake fixed. Thanks again everybody.

Mikey

02-21-2011, 10:52 PM	#1
Mikey72 Registered User Join Date: Sep 2010 Location: havelock, n.c. Posts: 19	4x4 rear cab mount measurements I have a 72 chevy 4x4 that was a lwb converted to swb. The frame was cut in front of the rear cab mounts for some reason. When i took my bed off to replace the floor some friends of mine noticed the drivers side rear cab mount was welded back to the frame about a 1/2 inch higher than the passenger cab mount which was onnly held on by two bolts that was drilled in. Does anyone know the measurements from the bottom of the frame to the bottom of the cab mount or something of better detail so i could get this horrible mistake fixed. Thanks again everybody. Mikey __________________ Big_Mac ( )(_.)(._)( ) ( ) \___/ ( )



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.