Hedman header question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheatham · 02-22-2011, 11:56 AM

Been away for quite a while! I will have to catch up with all the long timers and get to know everyone else.

I bought a set of Hedman 69090 headers yesterday. The passenger side went on without a problem, but obviously the clutch z-bar is interfering with the install on the driver side. I did some more research after the fact and the 69092 set looks like possible direct fit since the #7 pipe is bent differently.

Anyone have any input on the 69092's as a direct fit?

Answer: Hedman 69092 headers are a direct fit if you have a 3 speed column shift.

69090

69092

02-22-2011, 11:56 AM	#1
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	Hedman header question Been away for quite a while! I will have to catch up with all the long timers and get to know everyone else. I bought a set of Hedman 69090 headers yesterday. The passenger side went on without a problem, but obviously the clutch z-bar is interfering with the install on the driver side. I did some more research after the fact and the 69092 set looks like possible direct fit since the #7 pipe is bent differently. Anyone have any input on the 69092's as a direct fit? Answer: Hedman 69092 headers are a direct fit if you have a 3 speed column shift. 69090 69092 __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10 Last edited by cheatham; 02-23-2011 at 10:17 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.