|
02-27-2011, 08:57 PM
|
#1 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
Ignition help!!!
I just go0t my engine back from the builder and im haveing issues getting it to fire. I installed a new electric fuel pump and am getting right at 7psi at the carb so no fueling issue, and i layed a plug on the frame and it sparked so im getting spark but it still will not fire at all just cranks till its flooded. I checked then double checked the wire and they are all in the right spots. Im at the end of ideas with it. I have an MSD ignition with the 6A box and when the key is turned on i hear an audable cherp like sound conming from it. Anyone ever had this issue? I have to have it running by tomarrow night as I have to use it for work Tuesday morning so i need some help fast. Thanks everyone.
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
| Bookmarks |
|
|
Threaded Mode