VIN # match - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigd65 · 03-25-2011, 08:45 AM

Does anyone know if / or where the vin would be on the frame. I am beginning to think someone had changed the cab on my 82.

Vin on dash says was a diesel truck, however the gauge cluster has no mention of diesel fuel only or gauges that a diesel might use. Also being originally a 4x4. The hump has the added on large hump ( Not done correctly ) and the hole that was cut out in the original floor was not cut enough for the shifter to fully engage the 4x4.

I need to find out if or what has been changed on this truck. The P.O. did a poor job of fixing it up ( NOT RESTORED )

03-25-2011, 08:45 AM	#1
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,935	VIN # match Does anyone know if / or where the vin would be on the frame. I am beginning to think someone had changed the cab on my 82. Vin on dash says was a diesel truck, however the gauge cluster has no mention of diesel fuel only or gauges that a diesel might use. Also being originally a 4x4. The hump has the added on large hump ( Not done correctly ) and the hole that was cut out in the original floor was not cut enough for the shifter to fully engage the 4x4. I need to find out if or what has been changed on this truck. The P.O. did a poor job of fixing it up ( NOT RESTORED ) __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.