Behind Taillight Gas filler drawings... Will it work?

[Hazieview]

Okay guys I installed my custom fuel cell from Performance online that I payed way to much for () and had sprayed with bedliner. See if you all can understand what I'm getting at here.... I suck at explaining so this may be a waste of everyones time

Here is my tank with the fuel neck pointing towards the rear of the truck.


It comes with mounts welded to it that match to the frame pretty well. (Bolts will be replaced when tank is permanently installed)


Here is the hole behind the tail light that I will fill the gas from.


This fuel filler cap will bolt down inside this whole.


This is the bottom side of the truck where the fuel fill line will enter from the tail light above. The red arrow represents where the hose will enter. The blue line represents the 5" space that my 90 will have to be able to turn in order for the fuel to flow properly.


This shows the path the fuel line will travel until it gets to my fuel cell...


The green line now represents the fuel flow path into the fuel cell.


Here is an outer view to give another point of view.


Well guys what do you think? Will it work? Should i go with 2 mandrel bent stainles 1.5" 90s to make my bends or should I just go with one single 4ft/1.5" fuel filler hose and bend it accordingly?

Thanks for your input!