Banjo Bolt Size - The 1947 - Present Chevrolet & GMC Truck Message Board Network

coop34 · 04-17-2011, 07:30 PM

Does anyone know the banjo bolt size for the driver side of a 79 disc brake setup? Is it common for the two sides to have a different size?

I was having a heck of a time figuring out what calipers the previous owner put on my 70. Since it was a metric fitting, I figured a 79 would work. Well it worked with the passenger side, but the drivers side requires a different size banjo bolt.

Alternatively, does anyone know of a caliper that will work on my 70 and have 10mm banjo bolts on both sides? Ordinarily, I'd just go to the autoparts store and pick up a different size banjo bolt, but nobody seems to have what I need.

04-17-2011, 07:30 PM	#1
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Banjo Bolt Size Does anyone know the banjo bolt size for the driver side of a 79 disc brake setup? Is it common for the two sides to have a different size? I was having a heck of a time figuring out what calipers the previous owner put on my 70. Since it was a metric fitting, I figured a 79 would work. Well it worked with the passenger side, but the drivers side requires a different size banjo bolt. Alternatively, does anyone know of a caliper that will work on my 70 and have 10mm banjo bolts on both sides? Ordinarily, I'd just go to the autoparts store and pick up a different size banjo bolt, but nobody seems to have what I need.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.