double cardon in rear - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AlaskaMatt · 04-25-2011, 01:33 AM

Anyone run one on a 4x4? I've been fighting driveline vibes due to angles and am just about ready to go a whole new direction and get the double cardon setup.

Just to answer questions, I have been through the whole driveline. All u joints are good (new), tires are balanced, pinions bearings are solid etc.

I am going to try to pick up some shims tomorrow and try one more time to get it right (rear pinion is too high) before giving up. Shims are cheap.

04-25-2011, 01:33 AM	#1
AlaskaMatt Registered User Join Date: Apr 2010 Location: AK Posts: 198	double cardon in rear Anyone run one on a 4x4? I've been fighting driveline vibes due to angles and am just about ready to go a whole new direction and get the double cardon setup. Just to answer questions, I have been through the whole driveline. All u joints are good (new), tires are balanced, pinions bearings are solid etc. I am going to try to pick up some shims tomorrow and try one more time to get it right (rear pinion is too high) before giving up. Shims are cheap. __________________ Thanks, Matt My Website Last edited by AlaskaMatt; 04-25-2011 at 01:33 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.