Tilt steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wootdog · 07-21-2003, 08:05 PM

I know this has been mentioned alot, but I didn't right down the info. That is what happens when you have part timers. I need to know what late model steering columns with tilt are a fairly easy swap. This will have an automatic on the floor not the column. I would go back to the seventy two tilt for our trucks, but I have already modified the painless wiring harness for a late model. The problem is the column I have is kinda out of sorts and it hits where the brake booster is supposed to be mounted. Thus I can not install the booster/master cylinder. Sorry to ramble guys. Wootdog

07-21-2003, 08:05 PM	#1
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,677	Tilt steering column I know this has been mentioned alot, but I didn't right down the info. That is what happens when you have part timers. I need to know what late model steering columns with tilt are a fairly easy swap. This will have an automatic on the floor not the column. I would go back to the seventy two tilt for our trucks, but I have already modified the painless wiring harness for a late model. The problem is the column I have is kinda out of sorts and it hits where the brake booster is supposed to be mounted. Thus I can not install the booster/master cylinder. Sorry to ramble guys. Wootdog __________________ 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.