Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-18-2011, 09:29 PM | #1 |
Junior Member
Join Date: Mar 2009
Location: Elizabeth, Colorado
Posts: 38
|
MultiFunction Turn Signal Arm/Switch
Today I replaced my Mulitfunction Switch/Arm on my 04 Silverado. I looked at a few places online comparing prices on the before mentioned part. They were ranging from $135-$160 for the part. I stumbled upon 1AAuto.com and the part was $79.95 mailed to me USPS. Ordered on Sunday, order processed on monday, shipped, then got to me on Wednesday.
The reason for replacing was, all of a sudden my wipers while on intermitten, would just go on continiously and not shut off. After researching this issue I found it to be a problem with this particular part. I looked for videos on line, with none to be found, so I just jumped right in. I removed the instrument/dash bezel. Popped very carefully, the steering column covers and found the unit right there on top. I did have to take the lower cover down just a little with out removing the steering column tilt arm, to gain access to the lower torx screw holding the unit from the bottom. There was a single torx screw on top with 4 wiring connections to remove and the unit is in your hand. Reassemble in careful reverse order and you now have a new Mulitfunction Turn Arm/Switch installed. Part works great and the price was right.
__________________
04' Silverado 1500 ExtCab, 4x4, SWB - 240,000 & still Going, 62' C10 SWB, Stepside - Ole Green Girl! |
Bookmarks |
|
|