Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-30-2011, 12:37 AM | #1 |
Senior Member
Join Date: Jul 2010
Location: South Dakota
Posts: 4,093
|
Simple engine/tranny removal gone bad need help:(
Well we needed to do some work on the motor and replace a clutch and also do some work on the tranny but now were stuck, in a nut shell here's what's going on. I have a 307 mated with an sm 465 and we tried removing the transmission and motor as 1 but the shifter bump would not clear it so we tried taking the top over off by putting the shifter back in(buddy took it out) an put the tranny in reverse and then we removed the shifter again an unbolted the top but couldn't get the top off it moves up but won't completely come off (somethings catching it) but now the shifter when we put it back in won't move to any position an now I don't know what gear if any its in. Now the only thing to do I think is remove the bell housing from the motor and I'm wondering the step by step procedure, and everything is disconnected and there both just sitting there if that helps. Today was a crappy day so let's here some good news
Posted via Mobile Device Posted via Mobile Device
__________________
1969 Chevy c20(Miss Hackjob) |
Bookmarks |
|
|