Drop Questions

[Senor_paco]

Guys, Here is my 77 silverado (TX Classic License JUDS77) with my boy and a 2" drop in the rear. ince then, I put 2" dropped springs in the front, and it looks the same as stock, but just the 2" lower. My question is this. I put the hangers on the rear, but haven't done the shackles yet. I was trhinking about droping the front another 2" with spindles, and evening the rear would take 4". I guess that means a flip kit? I dont't wanna slam it, but the 4" rear, 2" front won't cut it on these tires. I'm going for about 2-3" of gap, to look really tight. Or can I go with some kind of inexspensive bag arrangment? I only go to Lowes or go cruising in it. I'm not dependent on it as a daily driver.

As you can see, I filled in the stake holes, and this pic was taken before I put the rolled pan on the back.

I bought it from my dad (the original owner) about 6 years ago, and spent 2 years on the motor alone Edelbrock 750, Perf rpm manifold, Crane 272 cam, all kinds of goodies, and it runs like a top! I only drive it maybe once or twice a month.