Houston, we have a problem...

[cr34t3d_by_d4rkd3n]

So on my 72 chevelle I went full led (via autozone's "jammer leds") combined with an eletronic flasher relay so it will 1) flash consistently and 2) not give the classic "burnt bulb error"

OKAY....

So on my 75 step, it is as follows: stop/turn lamps are in the same housing, same bulb, so they are 2way bulbs... rear markers are a single 180degree red leds (via superbrightleds.com), and the front markers are quad amber leds (autozone again)...all markers are the 194 blade style....

THE PROBLEM:: So when i go to put in the final set of leds, ((the front turn signals,)) when i put in am led bulb, IT DOES NOT BLINK, AND GIVES BURNT BULB SIGNAL.....but works proper /w/ standard filament bulbs,,,,,

I bought 2 round socket led's from superbrightleds.com (for front turns) and it did as described, figured, eah, whats 4 bucks??.... went to autozone today, bought 2 jamsters round socket type leds and same thing... burnt bulb signal and no blink, yet runners work.

Ive gone over it several times in my head, i have schematics however everything is working correctly, no breaks, all within resistance specs, ive done/tried everything!!!!

i come to you guys as a last option, I have no idea what to do.

THANKS!!!