Horn help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brock · 06-16-2011, 10:38 PM

I'm finally getting around to working on the truck again. But I/we can't figure out the horn button. I ordered a new horn contact kit from LMC and have a button. The steering column is a van tilt, but I used the steering wheel off the original column (Its a '68 by the way, if that matters). The problem is the horn button is VERY loose in the retainer. The button has a groove where it appears an O-ring or something should be. Am I missing something?

06-16-2011, 10:38 PM	#1
Brock upgrading to an older model Join Date: Aug 2007 Location: Sacramento, KY Posts: 346	Horn help I'm finally getting around to working on the truck again. But I/we can't figure out the horn button. I ordered a new horn contact kit from LMC and have a button. The steering column is a van tilt, but I used the steering wheel off the original column (Its a '68 by the way, if that matters). The problem is the horn button is VERY loose in the retainer. The button has a groove where it appears an O-ring or something should be. Am I missing something? __________________ 68 stepside, short-box, multi-colored (for now)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.