Does anyone have any other suggestions for what I can do?

[57HotTruck]

I'm running on 9x22 with 265/35 tires on my 57. I have been forced to use 30mm spacers because the rim hit my Pitman arm. even after I straightened it out

But after I lowered the it a little more I get a problem with the space between front wheel and fender, as seen in the photo.
It had been easy if I just could move the pitman arm 1 or 2 notches on the steering box, but it can only be moved 8 notches at a time

My plan is to cut the Pitman arm and weld it together a little offset. I have tried to show it with a piece of cardboard. With this I think I can do with 10mm spacers. I hope it is enough.

But I do not want to cut in the one I have. since I do not know if it will work.

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

I have searched on ebay, but there are not any to find.

Does anyone have any other suggestions for what I can do?