![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#11 |
Registered User
Join Date: Jul 2010
Location: Norman, Oklahoma
Posts: 557
|
Re: maxxy's 81 bagged c10 build
Ok now I think I solved my a/c problem!!! I went down to a smaller diameter tire. (I know it's just a temporary fix unless I keep the rallys forever) I originally had a 75 series tire, but first tried a 50 series tire, and it was just about 4 inches shorter than the original. ( which is wayyyyy to small) then I tried a 60 series tire and it's only about 1.5-2 inches shorter total. And it left me with about 3/4" clearance between tire and blower.
But then I ran into a new problem... My LCA hits the ground way early, and not like you'd think. My LCA's are djm but they are made for drop coils, and not meant to be this low.* ![]() The tire in the picture is the 50 series. So I think I'm just going to remove the recess where the bag is at and just put a flat plate in the bottom of the lca.* Equivalent to like 1.5" cupped stock arm. Posted via Mobile Device
__________________
Max Max's bagged 81 81 rcsb bagged, 22s, build in progress 09 ext cab, 24" U2's, DD sub/amp |
![]() |
![]() |
Bookmarks |
Tags |
1981, bagged, c10, custom, oklahoma |
|
|