![]() |
![]() |
#1 |
People know me
Join Date: Jun 2007
Location: Hermiston, oregon
Posts: 840
|
Engine wont start
Ok, I got a real headscratcher here. My 67' has a 400sbc in it. The thing has ran like a top, I dont drive it a whole lot, maybe once or twice a month. I hoped in it to move it the other day and it just cranked and cranked. I was in a hurry so I grabbed the dodge and went to work.
I have put it off for a while now and finally got back to it, Same thing just cranks, I shot some ether in it and nothing. It does crank faster/easier if i have the gas pedel pushed down. I figured it was a bad module, threw a spare in I had, nothing. Changed out the cap/coil with a known good one, nothing. At this point I pulled the one out of my Jimmy(a running one) and threw it in there, put power to the cap straight from the battery and cranked, nothing. It dosent even kick or sputter. I checked the grounds and they are new cables and clean. Where do I go from here?
__________________
1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels |
![]() |
![]() |
Bookmarks |
|
|