Hei --again

[chainsaw]

I finaly got the 283 out of my 65, building a new 283 with hei. Right now I have the yellow and the white resistor wire to + side of coil, purple to s on starter and yellow to r on starter- point dist to - side of coil. Question is do I remove the yellow, white and purple wires from the starter ? And where exactly on the fuse box do I run the wire from the hei dist. Any one have a pic with an arrow pointing to the right place on the fuse box, I'm to blind to read the lettering on fuse box. Any thing else I need to do for the converson? Thanks