The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-07-2011, 09:18 PM   #1
justtime520
Registered User
 
justtime520's Avatar
 
Join Date: Mar 2009
Location: Tucson AZ
Posts: 187
TBI 700r4 lock up ?

So i just got done a couple weeks ago with my tbi swap adventure. I put a 350 with 700r4 in my 71 c10. I used the wiring from a 90 burb.

I only have two problems. 1. I used the hole harness and took out only acc. so i have every thing in harness still like drac adl. every thing remained the same. However the 700r4 wont lock up in 4th and the only thing missing is the abs module. the module shows a pin for vss and tcc lock up. Do in need the abs module to complete the lock up process.

Side note 700r4 rebuilt by shop and tv was adjusted professionally.


2. The tbi seems to be running rich with a fowl smell. I cleaned the tbi and replaced the gaskets. I do have a small leak from the collector which is about 3 inches outward flow from the o2 sensor. not sure if thats my prob.

Any help or knowledge would be greatly appreciated.
justtime520 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com