blazer tank install ? little help here guys.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brans72 · 07-09-2011, 08:52 PM

First off I did use search but really did not help me out guys. I am installing a blazer tank from Brothers in a 67 C10 SWB and seems to me when I have it almost there the filler neck area is hitting top part of the driver side frame. I was curious be jumping into it has anyone ran into this problem? I thought about notch the frame out but figured I would check to see if I could get help here first. Thanks Brandon

07-09-2011, 08:52 PM	#1
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	blazer tank install ? little help here guys.... First off I did use search but really did not help me out guys. I am installing a blazer tank from Brothers in a 67 C10 SWB and seems to me when I have it almost there the filler neck area is hitting top part of the driver side frame. I was curious be jumping into it has anyone ran into this problem? I thought about notch the frame out but figured I would check to see if I could get help here first. Thanks Brandon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.