I'm freakin out........ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wwotr · 07-13-2011, 06:16 PM

OK on my 67 C-10, it had (2) "Door Jam Vents", one on each side.
So I went and bought a Set of these (below):
http://www.dreamershotrods.com/marqu...yandgmcpu.aspx

I go to install them on my 72 GMC Short Fleet, AND THERE IS ONLY 1 VENT ON THE DRIVERS SIDE!

I'm an IDGIT. I went and checked the Pass Side 3 seperate times, to see if maybe they put the Vent location, someplace else.

I'm looking for a rational explanation for why it would be on a 67 C-10, but didn't carry out to my 72.
Is it because of a Design change?
A Chevy vs a GMC (I know that's a long stretch)?

So now I have 2 Vents and only used 1.

07-13-2011, 06:16 PM	#1
wwotr Registered User Join Date: Jan 2005 Location: Clearlake Oaks CA Posts: 1,716	I'm freakin out........ OK on my 67 C-10, it had (2) "Door Jam Vents", one on each side. So I went and bought a Set of these (below): http://www.dreamershotrods.com/marqu...yandgmcpu.aspx I go to install them on my 72 GMC Short Fleet, AND THERE IS ONLY 1 VENT ON THE DRIVERS SIDE! I'm an IDGIT. I went and checked the Pass Side 3 seperate times, to see if maybe they put the Vent location, someplace else. I'm looking for a rational explanation for why it would be on a 67 C-10, but didn't carry out to my 72. Is it because of a Design change? A Chevy vs a GMC (I know that's a long stretch)? So now I have 2 Vents and only used 1. __________________ Hello members... I'd like you to know that I sold, my 72 GMC (Ratikle), back in November of 2011. I don't visit the site much anymore, but please feel free, to drop me a private message. RIP...."RATIKLE"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.