Been a while! figured id post some updates.

[dbmx66]

well i havent made any posts for a while so i figured it was time for some.
since i finally graduated high school yes high school hahahaha and got put on full time at the cnc machine shop i work at. ive had more time and money for the truck

updates:

-i milled the choke horn off my carb at my work.
-cut the inner fenders ( no not the wheel wells the actual inner fender)
-cut the inner besides out.
- cut more core support apart (see pics)
-machined custom aluminum rods with adjustable heim joints on the ends to support the bedsides since there is the inner bed, and make the besides perfectly parrallel so i can make me rescessed bedcover.
-removed the front of the bed.
- swapped the belltech shocks and springs out for moroso chevelle trick springs, and strange drag shocks.
-no more front sway bar
-finished all the wiring.
- machined my own adjustable solid carb linkage.
-new tubular race throttle pedal with custom bracket.
-longer studs and open ended lugs in front
- started my custom aluminum sheet metal bed cover (as you can see in picture only the frame is done)
-head lights, tail lights, marker lights and turns signals in
- custom billet grill mounts i made. ( since i hardly have a core support)
and more little things that i dont feel like listing

now all i need is to install my s&w anti-roll bar, finish the bed cover, get front runners and new slicks, and off the to track i go! finally after 3 years

her are some pictures.