What cups or plates to use? 20"s, accuair and stock components. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pkh66 · 07-15-2011, 10:17 PM

Here is what I'm trying to achieve. I want to lay level at all settings meaning utilizing the same or similar amount of the bags to front and rear. I am planning on running a CPP HD notch as I am not trying to disturb the bed. I am wanting to keep the original suspension components, TA's and CA's. Do I need to cup below the LCA?

Here is the gear,
Jason hooked it up on the accuair air mgmt 2 system.
20x8.5" and 20x13"s
Contitech 2600's all the way
Tires are 255/45r20's and 15x29x20's. They both should run around 29"s mounted.

How low will it go? Level.
Posted via Mobile Device

07-15-2011, 10:17 PM	#1
Pkh66 Registered User Join Date: Apr 2011 Location: Dallas Posts: 94	What cups or plates to use? 20"s, accuair and stock components. Here is what I'm trying to achieve. I want to lay level at all settings meaning utilizing the same or similar amount of the bags to front and rear. I am planning on running a CPP HD notch as I am not trying to disturb the bed. I am wanting to keep the original suspension components, TA's and CA's. Do I need to cup below the LCA? Here is the gear, Jason hooked it up on the accuair air mgmt 2 system. 20x8.5" and 20x13"s Contitech 2600's all the way Tires are 255/45r20's and 15x29x20's. They both should run around 29"s mounted. How low will it go? Level. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.