|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
09-06-2011, 03:01 PM
|
#11 |
|
Registered User
Join Date: Aug 2009
Location: Shawnee, OK
Posts: 106
|
Re: 1967 C-10 LS POWERED Build
The bottom end is gonna stay stock for now. The cam I went with is from cam motion. Its a custom grind 240/248 Duration 612/595 Lift on a 110 LSA RPM range is 3500-6500. i purchased some 650 lift springs to go with the cam. I'm going to run a carb intake as seen about with the LSX controller and Dynatech Headers 1 7/8 in. Primaries with a 3 in. Collector. Behind all that is a 400 turbo.
|
|
|
| Bookmarks |
|
|
Threaded Mode