Air bag help needed

[MP33]

I just want to start off saying I'm a newbe to air ride technology. I have a 63 C-10 SWB. Right now I have a 79 chevy C-10 front crossmember with 2.5" drop spindles and 1/2 a coil cut off the springs. in the back the suspension is stock except for the 72 chevelle springs. I have decided to bag it and last weekend at a local swapmeet I picked up a new, never installed kit for a 95 s-10. now I realize the brackets for the bags won't work on my truck but I'm hoping the rest will. The kit is a Hotaire by Chassis Tech and contains the following.

(1) Thomas 1/3hp compressor pt#270025
(4) Firestone Airstroke Actuators
(1) 5 gallon air tank with 3 fittings in/out/drain
(1) gauge/switch panel with 2 dual needle gages and 4 rocker sitches
(4) Norgren K81EA00KV8KV82W1 air valves
(1) Norgren water trap
(1) roll of wire
(1) roll of 3/8" plastic tubing
(1) box of misc pushlock t's and elbows

I did not get any intructions so maybe you can tell me if I am missing anything? I also need the brackets for mounting the bags to the front a-arms and rear trailing arms. Another thing is I have no idea how to wire it up so if you could give me some advise on that it would be greatly appreiciated.


Thanks......Mike