front dana 60 rebuild - The 1947 - Present Chevrolet & GMC Truck Message Board Network

darksaga · 08-19-2003, 01:39 PM

I took the diff cover off of my d60 front to check the gear ratio, and when I opened it a oil/water mix came out. Not good.

the internals look fine from what I can see, the ring has no rust but the axles stick on it pretty bad so the bearings are probably shot, Im going to try and rebuild it.

How hard are these to rebuild and for some reason I can't find a complete kit to do it any one have any links?

last time I googled I could not find a complete kit

also I need hubs for it will the hubs off of a dodge or ford d60 work?

08-19-2003, 01:39 PM	#1
darksaga Registered User Join Date: Nov 2002 Location: santa cruz cali Posts: 118	front dana 60 rebuild I took the diff cover off of my d60 front to check the gear ratio, and when I opened it a oil/water mix came out. Not good. the internals look fine from what I can see, the ring has no rust but the axles stick on it pretty bad so the bearings are probably shot, Im going to try and rebuild it. How hard are these to rebuild and for some reason I can't find a complete kit to do it any one have any links? last time I googled I could not find a complete kit also I need hubs for it will the hubs off of a dodge or ford d60 work? __________________ 1968 gmc 3/4 4x4 longbed. built 469 700r4 (needs a th400 REAL SOON!), 14bolt ff rear 73 3/4 dana 44 1970 chevelle all wheel disc, tubular rear control arms tall spindle swap up front matching #'s 350 work in Progress



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.