Bolt in steering rack

[dwcsr]

Originally Posted by 76stepside

Anybody try to mount their rack with factory lower control arms only to find out it wont fit! The rack just sits on top of the bushing part of the control arms... how much of the control arm in this area is safe to trim down so I can make the rack work? Attachment 830774

Attachment 830775

Attachment 830776

76stepside, I did a similar conversion about 5 years ago and ran into the same issue with stock lower control arm. You can modify the bushing area to make it work. You will need to press out the bushing in the front of the LCA.