The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-20-2011, 07:20 PM   #1
danpomeroy
Registered User
 
Join Date: Mar 2007
Location: Medford Oregon
Posts: 26
Carb help

I have a '69 C10 with a 350 and it's an automatic. It is stock except for the Accel Points Eliminator kit and the upgraded coil they suggested. It has the quadrajet 4 barrel that I rebuilt, fresh plugs and wires.

Since I did the tuneup it runs terrible. That's why I rebuilt the carb. That didn't help so I put in the points kit. I have rebuilt a few carbs and I feel good about that, in fact I picked up another one from Craigslist and compared inside and out. I am even more confident that it is right. I am also positive that I did the points kit right. It was pretty easy and it wouldn't start if I hadn't done it right.

The timing is right on, no vacuum leaks anywhere.

The fuel/air screws don't do anything when I turn them. I can turn them all the way in and nothing *Also, when I step hard on the gas, it really bogs down and almost dies. If I drive it normal, it will run but just barely.*

Any help would be SO appreciated.*
Posted via Mobile Device
__________________
1969 Chevy C10
350 SBC << Going Away
LM4/4L60E << Going In
My build thread
danpomeroy is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com