First time wiring an engine. Please help!!!

[Hazieview]

Ok guys I have an '81 Chevy shortbed with
c.i. SB400.
No A.C.
One wire alternator
High torque starter.

I purchased a stock replacement engine harness for my truck. I got the harness plugged into the fuse box through the fire wall and the bolt in. I plugged the next two plugs into the windshield wiped motor. Now where in the heck do the rest of the wires go? Haha!

1. One really Long thin pink wire with a round rubber cover.
2. One heavy red wire about one foot long.
3. Two red wires spliced into one single black wire

Further down....
4. One long thin green wire with a white plastic connector.
5. Three thin wires (pink, light blue, dark blue,) leading to a big black plastic plug with a side snap.
6. Fat pink wire with white plastic connector.
7. Thin light brown wire with a round rubber connector.

Further down...
8. A light blue wire with a plastic grey connector.
9. Two wires (one brown, one red) with a white plastic connector.
10. One red wire with a rubber boot.

Further down...
11. One purple wire
12. Two red wires spliced into a black wire.
13. One red wire spliced into a brown wire.
* the black and brown wire then splice together at a connector.

Please help me not burn down everything! The battery is disconnected for now! Thanks!
Posted via Mobile Device