Running engine with A/C or PS lines - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tmwoodall · 12-10-2011, 02:45 PM

I am hours away from finally being able to fire (I hope) my engine for the first time, but I have changed to a serpentine setup. So I am wondering if I can actually safely fire it without AC Lines or PS lines hooked up.

When I fired the old engine we just left those belts off, now with the serpentine kit on there so that isn't a possibility. For the PS I have to buy new lines to fit March's remote reservoir. For the AC, I don't have the cab on the frame or clean lines to install.

So is it safe to run the AC compressor without power but open connections, and the power steering pump totally open?

12-10-2011, 02:45 PM	#1
Tmwoodall Registered User Join Date: Jan 2011 Location: Austin, TX Posts: 632	Running engine with A/C or PS lines I am hours away from finally being able to fire (I hope) my engine for the first time, but I have changed to a serpentine setup. So I am wondering if I can actually safely fire it without AC Lines or PS lines hooked up. When I fired the old engine we just left those belts off, now with the serpentine kit on there so that isn't a possibility. For the PS I have to buy new lines to fit March's remote reservoir. For the AC, I don't have the cab on the frame or clean lines to install. So is it safe to run the AC compressor without power but open connections, and the power steering pump totally open? __________________ www.tomthetruck.blogspot.com <-- Aka build thread.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.