Ideas on my alignment specs

[INSIDIOUS '86]

So I'm getting my 86 Scottsdale aligned in the morning the specs going to give the mechanic are +5-7* degrees positive caster if i can get that much with stock setup and 1/16th toe out and -3* camber. I'm adding a lot of camber to compensate for the rolling action of the truck which In turn negates camber as it rolls. I do have a roll bar and three inch drop. From reading the make it handle thread for a few days rob says 5-7+* caster 1/8 toe in. Or toe out for some fun driving I changed that to 1/16 to maybe mild it since I have manuel steering on a p/s setup This sound like a good start for spirited daily driving?
Posted via Mobile Device