Brakes Again - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stickman · 01-27-2012, 04:45 PM

Brake pedal on my 72 goes about half way to floor then feels solid but dosen't hardly stop the P/U at all.Almost feels like only the back drums are working.I have installed new rotors and calipers from CPP and a new master cylinder and booster from NAPA.It was doing this before I replaced these parts and have blead the brakes numerous times and I tried a new master cylinder that I bench blead before installing but it is still the same.I disconnected the the booster and plugged it to see if it made a difference and I had even less brakes so I assumed the booster isn't the problem.Suggestions would be appreciated.

Thanks,Kirk

01-27-2012, 04:45 PM	#1
Stickman Registered User Join Date: Mar 2008 Location: Chandler,AZ Posts: 576	Brakes Again Brake pedal on my 72 goes about half way to floor then feels solid but dosen't hardly stop the P/U at all.Almost feels like only the back drums are working.I have installed new rotors and calipers from CPP and a new master cylinder and booster from NAPA.It was doing this before I replaced these parts and have blead the brakes numerous times and I tried a new master cylinder that I bench blead before installing but it is still the same.I disconnected the the booster and plugged it to see if it made a difference and I had even less brakes so I assumed the booster isn't the problem.Suggestions would be appreciated. Thanks,Kirk



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.