Rustbuket 67 build "Georgia"

[67c10rustbuket]

So, with the bell housing mount out of the way I stabbed the engine and trans in (yeah i'd rather have an LS but this was cheap and easy) here's a few shots of the engine and trans in the old 67. those old school motor mount stands were a pain! on my first attempt the starter was hitting the pass side mount stand and the oil filter was hitting the driver side mount stand. I removed the frame mount stands and put the engine and trans in place, then reinstalled the mount stands. Not much fun. I'm going to remove the oil cooler adapter and run it without for now although it is a good idea to have one on there.