Body damage repair first timer needs schooling. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

matchstick321 · 02-10-2012, 01:55 AM

Howdy.
I have a project truck (signature) that has holes all along the side of it from the trim panels that used to be on the side of it. And it has a little bit of fender rust. and holes underneath the dash from CB radios and trailer brake setups being screwed into it. and the door also has quite a bit of rust throughs.
I was just wondering what's the best way to fill these in or patch them. If anybody has or knows of a demonstration on what the best way is or how to do this I would be greatful!
Thanks.

02-10-2012, 01:55 AM	#1
matchstick321 Registered User Join Date: Feb 2012 Location: Lapwai idaho Posts: 63	Body damage repair first timer needs schooling. Howdy. I have a project truck (signature) that has holes all along the side of it from the trim panels that used to be on the side of it. And it has a little bit of fender rust. and holes underneath the dash from CB radios and trailer brake setups being screwed into it. and the door also has quite a bit of rust throughs. I was just wondering what's the best way to fill these in or patch them. If anybody has or knows of a demonstration on what the best way is or how to do this I would be greatful! Thanks. __________________ 1979 chevrolet k-20 "O'l Blue" 350 muncie 465. Project in process.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.